Vivaspin 6 Centrifugal Concentrator
2 - 6 ml samples
Vivaspin 6 ml concentrators have been developed to offer increased volume flexibility and performance.
Vivaspin 6 can process an impressive 6 ml in either swing bucket or fixed angle rotors accepting standard 15 ml conical bottom test tubes.
The Vivaspin 6 features twin vertical membranes for unparalleled filtration speeds and 100x plus concentrations. Remaining volume is easy to read off the printed scale on the side of the concentrator and the modified dead stop pocket further simplifies direct pipette recovery of the final concentrate.
|
Time to concentrate up to 30x [min.] at 20°C and solute recovery % |
||||
| Rotor | Swing bucket | 25° Fixed angle | ||
| Centrifugal force | 3,000 x g | 7,500 x g | ||
| Start volume | 6 ml | 6 ml | ||
| Min. | Rec. | Min. | Rec. | |
| Cytochrome c0.25 mg / ml (12,400 MW) | ||||
| 5,000 MWCO PES | - | - | 90 | 97% |
| BSA 1.0 mg / ml (66,000 MW) | ||||
| 5,000 MWCO PES | 20 | 98% | 12 | 98% |
| 10,000 MWCO PES | 13 | 98% | 10 | 98% |
| 30,000 MWCO PES | 12 | 98% | 09 | 97% |
| IgG 0.25 mg / ml (160,000 MW) | ||||
| 30,000 MWCO PES | 18 | 96% | 15 | 95% |
| 50,000 MWCO PES | 17 | 96% | 14 | 95% |
| 100,000 MWCO PES | 15 | 91% | 12 | 91% |
| Latex beads 0.004 % in DMEM +10 % FCS (0.055 µm) | ||||
| 300,000 MWCO PES | - | - | 25 | 99% |
| Latex beads 0.004 % in DMEM +10 % FCS (0.24 µm) | ||||
| 1,000,000 MWCO PES | - | - | 4 | 99% |
| Yeast 1.0 mg / ml (S. Cerevisiae) | ||||
| 0.2 µm PES | 4 | 97% | 3 | 97% |
| Concentrator Capacity | |
| Swing bucket rotor | 6 ml |
| Fixed angle rotor | 6 ml |
| Dimensions | |
| Total Length | 122 mm |
| Width | 17 mm |
| Active Membrane Area | 2.5 cm² |
| Hold-up volume of membrane | <10 µl |
| Dead stop volume | 30 µl |
| Materials of Construction | |
| Body | Polycarbonate |
| Filtrate Vessel | Polycarbonate |
| Concentrator Cap | Polypropylene |
| Membrane | Polyethersulfone |
| Centrifuge | ||
| Rotor Type | Swing bucket | Fixed Angle |
| Minimum rotor angle | - | 25° |
| Rotor Cavity | To fit 15 ml (17 mm) conical bottom tubes | To fit 15 ml (17 mm) conical bottom tubes |
| Maximum Speed | 4,000 g | 10,000 g* |
| Concentrate Recovery | ||
| Pipette type | Fixed or variable volume | Fixed or variable volume |
| Recommended tip | Thin gel loader type | Thin gel loader type |
* Please note, devices with membrane MWCO > 100 kDa need to be processed at lower g forces. See data sheet for details.
| Vivaspin 6 Polyethersulfone | Pack Size | Prod. No. | |
| 3,000 MWCO | 25 | VS0691 | BUY |
| 100 | VS0692 | BUY | |
| 5,000 MWCO | 25 | VS0611 | BUY |
| 100 | VS0612 | BUY | |
| 10,000 MWCO | 25 | VS0601 | BUY |
| 100 | VS0602 | BUY | |
| 30,000 MWCO | 25 | VS0621 | BUY |
| 100 | VS0622 | BUY | |
| 50,000 MWCO | 25 | VS0631 | BUY |
| 100 | VS0632 | BUY | |
| 100,000 MWCO | 25 | VS0641 | BUY |
| 100 | VS0642 | BUY | |
| 300,000 MWCO | 25 | VS0651 | BUY |
| 100 | VS0652 | BUY | |
| 1.000,000 MWCO | 25 | VS0661 | BUY |
| 100 | VS0662 | BUY | |
| 0.2 µm | 25 | VS0671 | BUY |
| 100 | VS0672 | BUY | |
| Starter pack (5 of each 5k, 10k, 30k, 50k, 100k) | 25 | VS06S1 | BUY |
How to Order
Copyright© Vivaproducts 1998-2010.