CENTRISART® A-14
Vivaproducts' new high speed benchtop centrifuge, CENTRISART® A-14, is ideally suited for sedimentation in 0.2 ml to 2.2 ml micro tubes.
The large display allows high legibility of the values for speed, relative centrifugal force and running time. These parameters are set quickly and simply with push buttons. The CENTRISART® A-14 operates smoothly and quietly.
CENTRISART® A-14 is equipped with a polypropylene rotor for 12x1.5-2.2ml tubes. Other rotors can be ordered additionally.
Special Applications With
- VoluPac tubes for determination of packed cell volume
- Vivaspin 500 ultrafiltration units for sample concentration
Features & Benefits
- Large capacity ( 12 x 1.5-2.2 ml tubes, optionally 18 or 24 tubes )
- Top speed of 14,800 rpm, very high relative centrifugal force of 16,163 x g
- Bright display offers good legibility; choice of rpm/RCF
- Simple, direct operation using push buttons
- Shortrun, Softstart and Softstop - the only one to offer this feature in its class
- Large selection of additional polypropylene or aluminium rotor
- Air cooling ensures minimal temperature increase of samples in the rotor bowl
| Electric supply |
220-240 V 50/60 Hz, 100-120 V 50/60 Hz |
| Power consumption | 95 W |
| Max. capacity | 24 x 2.2 ml |
| Max. speed rpm | 14.800 |
| Min. speed rpm | 200 |
| Dimensions (Height x Width x Depth) | 176 x 266 x 212mm |
| Weight without rotor | 5.4kg |
| Kinetic energy max. Nm | 1721 |
| Interference suppression EN | 61326 |
| Noise level at max. speed (approx.) | 58 dB |
| Max. acceleration: rotor 12092 | 13 sec. |
| Max. deceleration: rotor 12092 | 11 sec. |
| Max. temperature increase rotor 12092, 20 min/continuous | 9/13°C |
| maintenance-free brushless drive motor | |
| set time up to 99 min, 59 sec., continuous run | |
| automated opening of lid, emergency opening of lid |
How to Order
Copyright© Vivaproducts 1998-2010.