Vivapore 5 Solvent Absorption Concentrator
0.5 - 5 ml samples
With no need for additional equipment, pressure or vacuum, solvent absorption is the most economic and user friendly concentration technique available to the clinician and research scientist.
Just fill the unit with the solution to be concentrated, wait for the desired concentration level to be achieved and then pipette the concentrated sample from the bottom of the reservoir.
Vivapore is ideal for general purpose laboratory concentration or purification prior to further analysis. It is particularly suited for labile solutions that can denature with alternative shear or pressure inducing methods or that require processing in a cold room environment.
Vivapore concentrators extend the solvent absorption technique to a totally new level of performance, application potential and ease of use.
|
Time to concentrate up to 10x [min.] |
Concentrate recovery % | |
| Start volume | 5 ml | 5 ml |
| 0.25 mg / ml | 0.25 mg / ml | |
| Cytochrome c (12,600 MW) | ||
| 7,500 MWCO PES | 35 | 90% |
| BSA (66,000 MW) | ||
| 7,500 MWCO PES | 30 | 92% |
| IgG (160,000 MW) | ||
| 7,500 MWCO PES | 40 | 75% |
|
Time to concentrate up to 50x [min.] |
Concentrate recovery % | |
| Cytochrome c (12,600 MW) | ||
| 7,500 MWCO PES | 70 | 88% |
| BSA (66,000 MW) | ||
| 7,500 MWCO PES | 50 | 90% |
| IgG (160,000 MW) | ||
| 7,500 MWCO PES | 65 | 65% |
| Membrane material | PES |
| Membrane MWCO | 7,500 |
| Membrane surface area | 20 cm² |
| Reservoir material | SAN |
| Volume range | 1 - 5 ml |
| Minimum concentrate volume | 50 µl |
| Overall dimensions | |
| Width (mm) | 42 |
| Height (mm) | 82 |