Up to 100 ml starting volume
Vivaspin® 100 is the latest member of the Vivaspin® family.
The patented vertical membrane design allows highest performance and unmatched flexibility.
Vivaspin® 100 is a unique and innovative concentrator for volumes from 20 ml to 100 ml, which utilizes pressure, centrifuge or pressure-shake to rapidly concentrate even samples with very high particle loading.
Vivaspin® 100 is designed for centrifugal concentration of samples up to 100 ml which makes it the largest centrifugal unit available. At the same time, the new construction design allows for maximum centrifugal force of 4,000x g to be used for even faster concentration.
Vivaspin® 100 utilizes:
Vivaspin® 100, when used as a centrifugal device, fits only into swing bucket rotors accepting 250 ml bottles.
Vivaspin® 100 units can also be used for single or extremely sensitive samples in the pressurized mode only and left on the bench or placed on a laboratory shaker for faster concentration. It can also be kept in a pressurized mode in the refrigerator. Handling is made easy by use of quick connectors. In whichever mode Vivaspin® 100 is used, the vertical membrane design inhibits membrane fouling while the builtin dead stop impedes concentration to dryness and loss of sample.
Time to concentrate up to 30x [min.] at 20°C |
||||
90 ml start volume |
In centrifuge 2,000 g swing-out rotor |
As pressure cell 4 bar (60 psi) pressure |
Solute recovery |
|
No agitation | Orbital shake | % | ||
BSA 1.0 mg / ml (66,000 MW) | ||||
5,000 MWCO PES | 22 | 75 | 25 | 96% |
10,000 MWCO PES | 16 | 60 | 20 | 96% |
30,000 MWCO PES | 16 | 60 | 20 | 94% |
IgG 0.25 mg / ml (160,000 MW) | ||||
50,000 MWCO PES | 20 | 70 | 30 | 94% |
100,000 MWCO PES | 20 | 85 | 30 | 90% |
Latex beads 0.004 % in DMEM +10 % FCS (0.055 µm) | ||||
300,000 MWCO PES | 35 | - | 120 | 99% |
Latex beads 0.004 % in DMEM +10 % FCS (0.24 µm) | ||||
1,000,000 MWCO* PES | 4 | 5 | 4 | 99% |
* 2,000 g in centrifuge, 2 bar (29 psi) pressure
Concentrator Capacity | |
Swing bucket rotor | 90 ml |
With pressure head | 98 ml |
Dimensions | |
Total Length | 123 mm centrifugal |
197 mm with pressure head | |
Width | 62 mm |
Active Membrane Area | 23.5 cm² |
Hold-up volume of membrane | < 250 µl |
Dead stop volume | 350 µl |
Operating requirements | |
Rotor type | Swing bucket |
Rotor cavity |
To fit 250 ml (62 mm) centrifuge bottles (maximum cavity depth 105 mm) |
Maximum speed | 2,000 g |
Maximum pressure | 5 bar (75 psi) |
Materials of Construction | |
Body | Polycarbonate |
Filtrate Vessel | Polycarbonate |
Concentrator Cap | Santoprene |
Pressure Head | Acetal |
Membrane | Polyethersulfone |
Description | Prod. No. | Price | |
5,000 MWCO, PES Membrane, 2 per pack | VC1011 |
$102.00 |
Add to Cart |
5,000 MWCO, PES Membrane, 10 per pack | VC1012 |
$458.00 |
Add to Cart |
10,000 MWCO, PES Membrane, 2 per pack | VC1001 |
$102.00 |
Add to Cart |
10,000 MWCO, PES Membrane, 10 per pack | VC1002 |
$458.00 |
Add to Cart |
30,000 MWCO, PES Membrane, 2 per pack | VC1021 |
$102.00 |
Add to Cart |
30,000 MWCO, PES Membrane, 10 per pack | VC1022 |
$458.00 |
Add to Cart |
50,000 MWCO, PES Membrane, 2 per pack | VC1031 |
$102.00 |
Add to Cart |
50,000 MWCO, PES Membrane, 10 per pack | VC1032 |
$458.00 |
Add to Cart |
100,000 MWCO, PES Membrane, 2 per pack | VC1041 |
$102.00 |
Add to Cart |
100,000 MWCO, PES Membrane, 10 per pack | VC1042 |
$458.00 |
Add to Cart |
300,000 MWCO, PES Membrane, 2 per pack | VC1051 |
$102.00 |
Add to Cart |
300,000 MWCO, PES Membrane, 10 per pack | VC1052 |
$458.00 |
Add to Cart |
1,000,000 MWCO, PES Membrane, 2 per pack | VC1061 |
$102.00 |
Add to Cart |
1,000,000 MWCO, PES Membrane, 10 per pack | VC1062 |
$458.00 |
Add to Cart |
0.2 µm MWCO, PES Membrane, 2 per pack | VC1071 |
$102.00 |
Add to Cart |
0.2 µm MWCO, PES Membrane, 10 per pack | VC1072 |
$458.00 |
Add to Cart |
Description | Prod. No. | Price | |
Air pressure controller (APC) complete with pressure gauge, regulator, over-pressure safety valve, female connector, and 1 m extension line (4 mm pneumatic tubing) with male and female connectors and 1 m of 6 mm inlet tubing | VCA002 |
$449.00 |
Add to Cart |
Female connector | VCA010 |
$68.50 |
Add to Cart |
Male connector | VCA011 |
$56.70 |
Add to Cart |
4 mm OD pneumatic tube (3 ml) | VCA012 |
$12.80 |
Add to Cart |
Santoprene replacement seals, 10 per pack | VCA014 |
$22.50 |
Add to Cart |
Vivaspin 100 pressure head with replacement seals (5) | VCA800 |
$225.00 |
Add to Cart |
NOTE: We have redesigned our shopping cart to improve security for our customers. Unfortunately past users will have to create new accounts with this shopping cart. We apologize for this inconvenience and hope you will understand.